Center for Thermal Spray Research

Materials Science & Engineering Department

Kentaro Shinoda

(Post-doctoral Associate)

Contact:

Room No. 103, Heavy Engineering building
Stony Brook University, NY 11794, USA.
Email: kshinoda_at_notes.cc.sunysb.edu
Ph: 631-632-4511
Fax: 631-632-7878

Education

Ph.D.
Department of Materials Engineering
Graduate School of Engineering,
The University of Tokyo, Japan (2006)

Master of Engineering, The University of Tokyo, Japan, (2002)

Bachelor of Engineering, The University of Tokyo, Japan, (2000)

Research Experience

2008-Present: Post-doctoral Associate, Center for Thermal Spray Research, Stony Brook University, USA
2008-Present: Visiting researcher, Composites & Coatings Center, National Institute for Materials Science (NIMS), Japan
2006-2008: Post-doctoral Associate, Composites & Coatings Center, National Institute for Materials Science, Japan
2005 : Visiting scholar, Center for Advanced Coating Technologies, University of Toronto, Canada
2003-2006: Research Assistant, Graduate School of Engineering, The University of Tokyo, Japan
2000-2003: Research Assistant, Graduate School of Engineering, The University of Tokyo, Japan

Current Activities

The main focus of the research is thermal barrier coatings (TBCs) of yttria-stabilized zirconia (YSZ) by Atmospheric plasma spraying. Especially, I'm focusing on the deposition rate effects on stress evolution during TBC formation by utilizing 3-dimensional in-flight particle diagnostics system and an in situ curvature monitoring sensor. Obtained knowledge can be extended not only to structual materials like YSZ but also to semiconducting materials like silicon. Single splat work is also under going as my life work.

Honors & Awards

Best Presentation Award, High Temperature Society Japan, November 2007.
Young Incentive Award 2007, Japan Thermal Spray Society, June 2007.
Best Paper Award, International Thermal Spray Conference 2007, Beijing, China, May 2007.
Young Incentive Award, High Temperature Society Japan, November 2006.
Student fellowship to attend the Gordon Research Conference on Plasma Processing Science, Gordon Research Conference on Plasma Processing Science, 2004 (Declination).
Awards for Asian Promising Researcher, International Thermal Spray Conference 2004, Osaka, Japan, May 2004.
Student fellowship to attend the Gordon Research Conference on Plasma Processing Science, Gordon Research Conference on Plasma Processing Science, New Hampshire, USA, July 2002.

Publications

Peer-Reviewed Journal Papers

K. Shinoda, H. Murakami, S. Kuroda, K. Takehara, and S. Oki, In situ visualization of impacting phenomena of plasma-sprayed zirconia: from single splat to coating formation, Journal of Thermal Spray
Technology, in press.
M. Watanabe, S. Kishimoto, Y. Xing, K. Shinoda, and S. Kuroda, Evaluation of strain field around impacted particles by applying electron moiré method, Journal of Thermal Spray Technology, 16 (5-6), 2007, pp. 940-946.
P. Chivavibul, M. Watanabe, S. Kuroda, and K. Shinoda, Effects of carbide size and Co content on the microstructure and mechanical properties of HVOF-sprayed WC-Co coatings, Surface and Coatings Technology, 202 (3), 2007, pp. 509-521.
K. Shinoda, H. Murakami, S. Kuroda, S. Oki, K. Takehara, and T.-G. Etoh, High-speed thermal imaging of yttria-stabilized zirconia droplet impinging on substrate in plasma spraying, Applied Physics Letters, 90 (19), 2007, Art No. 194103 (3 pages).
K. Shinoda, A. Yamada, M. Kambara, Y. Kojima, and T. Yoshida, Deformation of alumina droplets on micro-patterned substrates under plasma spraying conditions, Journal of Thermal Spray Technology, 16 (2), 2007, pp. 300-305.
K. Shinoda, T. Koseki, and T. Yoshida, Influence of impact parameters of zirconia droplets on the splat formation and morphology in plasma spraying, Journal of Applied Physics, 100 (7), 2006, Art No. 074903 (6 pages).
K. Shinoda, Y. Kojima, and T. Yoshida, In-situ measurement system for deformation and solidification phenomena of yttria-stabilized zirconia droplets impinging on quartz substrate under plasma spraying conditions, Journal of Thermal Spray Technology, 14 (4), 2005, pp. 511-517.

Reviews and Articles

K. Shinoda, Development of in situ measurement system for monitoring impacting phenomena of plasma-sprayed particles: case study for zirconia, Thermal Spraying Technique, 26 (2-3), 2007, pp. 51-55 (in Japanese).

Proceedings

K. Shinoda, H. Murakami, S. Kuroda, S. Oki, and K. Takehara, In situ visualization of impacting phenomena of plasma-sprayed zirconia: from single splat to coating formation, Proceedings of the International Thermal Spray Conference 2008, Maastricht, the Netherlands, June 2008, pp. 825-830.
10. K. Shinoda, H. Murakami, S. Kuroda, S. Oki, K. Takehara, and T. –G. Etoh, High-speed thermal imaging of yttria-stabilized zirconia droplets impinging on a substrate in plasma spraying, Proceedings of the 18th International Symposium on Plasma Chemistry, 2007, ID 28C-a3 (4 pages).
K. Shinoda, A. Yamada, T. Koseki, and T. Yoshida, Deformation and solidification process of a single sprayed zirconia droplet impinging on the substrate: in-situ measurement and numerical simulation, Proceedings of the 17th International Symposium on Plasma Chemistry, 2005, ID 295 (4 pages).
K. Shinoda, A. Yamada, T. Koseki, and T. Yoshida, In-situ measurement of sprayed ceramics particles and supercooling effects on splat morphology, Proceedings of the International Thermal Spray Conference, 2004, pp. 1004-1007.
K. Shinoda, R. Takenoshita, Y. Kojima, and T. Yoshida, In-situ measurement system for correlating splat morphology and solidification process under plasma spraying conditions, Proceedings of the 16th International Symposium on Plasma Chemistry, 2003, ID 620 (4 pages).
K. Shinoda, P. Han, and T. Yoshida, The microstructure of ysz splats deposited by hybrid plasma spraying, Proceedings of the 15th International Symposium on Plasma Chemistry, 2001, pp. 2661-2666.

Presentations at International Conferences

K. Shinoda, A. Valarezo, J. R. Colmenares-Angulo, G. Dwivedi, S. Sampath, Deposition rate effects on stress evolution during plasma spraying of thermal barrier coatings, 33rd International Conference and Exposition on Advanced Ceramics and Composites, Florida, USA, to be presented in January 2009 (Refereed, Accepted for Oral).
K. Shinoda, H. Murakami, S. Kuroda, S. Oki, and K. Takehara, In situ visualization of impacting phenomena of plasma-sprayed zirconia: from single splat to coating formation, International Thermal Spray Conference 2008, Maastricht, the Netherlands, June 2008 (Refereed, Oral).
K. Shinoda, H. Murakami, S. Kuroda, S. Oki, K. Takehara, and T. –G. Etoh, High-speed thermal imaging of yttria-stabilized zirconia droplets impinging on a substrate in plasma spraying, 18th International Symposium on Plasma Chemistry, Kyoto, Japan, August 2007 (Refereed, Oral).
K. Shinoda, H. Murakami, and S. Kuroda, Rapid deformation and solidification phenomena of yttria-stabilized zirconia droplets impinging on a substrate, 2nd Tsukuba International Coatings Symposium, Tsukuba, Japan, November 2006 (Invited, Oral).
K. Shinoda, A. Yamada, T. Koseki, and T. Yoshida, Deformation and solidification process of a single sprayed zirconia droplet impinging on the substrate: complementary approach between in-situ measurement and numerical simulation, 17th International Symposium on Plasma Chemistry, Toronto, Canada, August 2005 (Refereed, Oral).
K. Shinoda, A. Yamada, T. Koseki, and T. Yoshida, In-situ measurement of sprayed ceramics particles and supercooling effects on splat morphology, International Thermal Spray Conference 2004, Osaka, Japan, May 2004 (Oral, Award for Asian Promising Researcher).
K. Shinoda, R. Takenoshita, Y. Kojima, and T. Yoshida, In-situ measurement system for correlating splat morphology and solidification processing under plasma spray conditions, 16 the International Symposium on Plasma Chemistry, Taormina, Italy, June 2003 (Refereed, Poster).
K. Shinoda, R. Takenoshita, Y. Kojima, and T. Yoshida, In-situ measurement system for correlating sprayed splat morphology and solidification process, University of Tokyo – University of Toronto Workshop, Tokyo, Japan, March 2003 (Oral).
K. Shinoda, Y. Kojima, and T. Yoshida, A one to one correspondence between the final splat morphology and the in-situ measurement emission history of an impacting ysz droplet under spraying conditions, Gordon Research Conference on Plasma Processing Science, New Hampshire, USA, July 2002 (Refereed, Poster).
K. Shinoda, P. Han, and T. Yoshida, The microstructure of ysz splats deposited by hybrid plasma spraying, 15th International Symposium on Plasma Chemistry, Orleans, France, July 2001 (Refereed, Poster).

*Last update: October 3rd, 2008

Last Updated: June 11^th 2010